MENU
EN
EN ID
BUY PARTS
REQUEST QUOTE
FIND LOCATION
1500228
Call Center 24/7
LIVE CHAT 24 HOURS
CHAT VIA WEBSITE
CHAT VIA WHATSAPP
back
to top
Back to listing page

14

Motor Graders

Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14 features a host of integrated technology solutions that increase operator efficiency, boost productivity levels and lower owning and operating costs. The 14 takes advantage of a larger engine, increased fuel efficiency, improved machine balance, enhanced transmission performance, more powerful telematics and added operator safety/convenience features.

Show
Base Power (1st Gear) - Net 178 kW
Engine Model TCD3.6 L4
Bore 98 mm
Stroke 157 mm
Availability Contact Dealer
Request A Quote Rent a Machine
Download Brochure
14
Request A Quote

OVERVIEW

Loaded With Power, Technology and Operator Features

FEATURES & BENEFITS

TECHNOLOGY THAT PUSHES PROFITS

Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematical... Read more

MAXIMIZE PERFORMANCE

The Cat C13 engine meets the emissions standards equivalent to Tier 4 End of the US Environmental Protection Agency / EU Stage V or Tier 3 / Stage IIIA / MAR-1 of Brazil... Read more

MOVE MORE, BURN LESS

Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance.Proportional Priority Pressure-Compensating valves... Read more

SIMPLE TO OPERATE

Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.Optional Advanced Control Joysticks allow... Read more

BUILT-IN SAFETY FEATURES

Optional rear vision camera enhances sight to rear of machine.Electrical disconnect and engine shutoff switches are ground level.Operator Presence System keeps parking br... Read more

SAVE MAINTENANCE TIME

Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.Shim less Moldboard Retention System uses... Read more

SPECIFICATIONS FOR 14

Collapse All
Engine
Base Power (1st Gear) - Net 178 kW
Engine Model TCD3.6 L4
Bore 98 mm
Stroke 157 mm
Speed at Rated Power 1,850 rpm
Note (2) Optimized VHP Plus is standard for the 14M3.
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Maximum Torque - VHP Plus 1542 N·m
Maximum Altitude - Full Power (Tier 2) 3672 m
Maximum Altitude - Full Power (Tier 3) 4374 m
Standard - Fan Speed - Minimum 550 rpm
Standard Capability 50 °C
Emissions Tier 4 Final/Stage IV or Tier 3/Stage IIIA/Brazil MAR-1 equivalent or Tier 2/Stage II equivalent
Note (4) Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp)
Torque Rise 41%
Maximum Altitude - Full Power 4237 m
Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Displacement 3.6 l
Number of Cylinders 6
Maximum Torque 410 N·m
Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Standard - Fan Speed - Maximum 1,600 rpm
Frame
Front Axle - Total Oscillation per Side 32°
Circle - Outer Diameter 1822 mm
Front Axle - Wheel Lean - Left/Right 17.1°
Moldboard
Blade Width 4.2 m
Arc Radius 413 mm
Throat Clearance 117 mm
Blade Width - Without End Bits 4166 mm
Blade Height - Without Cutting Edge 585 mm
Blade Width - With End Bits 4290 mm
Blade Height - With Cutting Edge 631 mm
Blade Range
Maximum Depth of Cut 593 mm
Moldboard Sideshift - Left 740 mm
Moldboard Sideshift - Right 790 mm
Maximum Lift Above Ground 419 mm
Circle Centershift - Right 520 mm
Blade Tip Range - Forward 40°
Blade Tip Range - Backward 5°
Circle Centershift - Left 650 mm
Maximum Shoulder Reach Outside of Tires - Left 1870 mm
Maximum Shoulder Reach Outside of Tires - Right 2004 mm
Weights
Operating Weight - Typically Equipped 25968 kg
Gross Vehicle Weight - Base* - Front Axle 6344 kg
Gross Vehicle Weight - Base* - Total 23124 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle 19053 kg
Gross Vehicle Weight - Base* - Rear Axle 16780 kg
Gross Vehicle Weight - Typically Equipped - Total 25968 kg
Gross Vehicle Weight - Typically Equipped - Front Axle 6915 kg
Note *Represents machine configuration of 74.4 kW (100 hp) engine on standard 405/70 T20 MPT01 tires.
Hydraulic System
Pump Type Gear

SELECT MODELS TO COMPARE

Motor Graders

160 / 160 AWD

Base Power (1st Gear) - Net 159 kW
Engine Model Cat® C9
Base Power (1st Gear, AWD Off) - Net 159 kW
Base Power (1st Gear) - Net - Metric 159 kW
Compare models
Motor Graders

120

Net Power Range (Tier 3) 123 kW
Engine Model Cat 7.1
Engine RPM 2,000
Emissions China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA, and meets India CEV Stage V emission standards
Compare models
Motor Graders

160K

Base Power (1st Gear) - Net 139 kW
Engine Model Cat® C7
Displacement 7.2 l
Bore 105 mm
Compare models
Motor Graders

16 GC

Engine Model Cat® C13
Emissions Equivalent to U.S. EPA Tier 3/EU Stage IIIA
Displacement 12.5 l
Bore 130 mm
Compare models
Motor Graders

14

Base Power (1st Gear) - Net 178 kW
Engine Model Cat C13
Bore 130 mm
Stroke 157 mm
Compare models
Motor Graders

24

Net Power - EEC 80/1269 399 kW
Bore 137.2 mm
Stroke 152.4 mm
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Compare models
Motor Graders

120 GC

Net Power - ISO 9249/SAE J1349 128 kW
Maximum Torque 738 N·m
Engine Model Cat® C4.4
Bore 105 mm
Compare models
Motor Graders

18

Base Power (1st Gear) - Net 227 kW
Engine Model Cat® C13
Bore 130 mm
Stroke 157 mm
Compare models
of
01
SEND REQUEST

Select your equipment and fill out your contact information

02
GET A QUOTE

A sales rep will send you an official quote and other related information

03
PAYMENT & DELIVERY

Payment – Lead time - Delivery

Select Up to
3 Models to Compare
Model 1
Model 2
Model 3
Compare Cancel