MENU
EN
EN ID
BUY PARTS
REQUEST QUOTE
FIND LOCATION
1500228
Call Center 24/7
LIVE CHAT 24 HOURS
CHAT VIA WEBSITE
CHAT VIA WHATSAPP
back
to top
Back to listing page

14

Motor Graders

Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14 features a host of integrated technology solutions that increase operator efficiency, boost productivity levels and lower owning and operating costs. The 14 takes advantage of a larger engine, increased fuel efficiency, improved machine balance, enhanced transmission performance, more powerful telematics and added operator safety/convenience features.

Show
Base Power (1st Gear) - Net 178 kW
Engine Model Cat C13
Bore 130 mm
Stroke 157 mm
Availability Ready Stock Estimated delivery : 2 - 3 weeks
Request A Quote Rent a Machine
Download Brochure
14
Request A Quote

OVERVIEW

Loaded With Power, Technology and Operator Features

FEATURES & BENEFITS

TECHNOLOGY THAT GETS WORK DONE

Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematical... Read more

MOVE MORE, BURN LESS

Cat C13 engine meets U.S. EPA Tier 4 Final/EU Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of s... Read more

MORE CONTROL AND EFFICIENCY

Load-sensing system and advanced electro hydraulics give operator superior implement control and hydraulic performance.Proportional Priority Pressure-Compensating valves... Read more

DESIGNED FOR OPERATORS

Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.Optional Advanced Control Joysticks allow... Read more

BUILT-IN SAFETY FEATURES

Optional rear vision camera enhances sight to rear of machine.Electrical disconnect and engine shutoff switches are ground level.Operator Presence System keeps parking br... Read more

SAVE MAINTENANCE TIME

Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.Shim less Moldboard Retention System uses... Read more

SPECIFICATIONS FOR 14

Collapse All
Engine
Base Power (1st Gear) - Net 178 kW
Engine Model Cat C13
Bore 130 mm
Stroke 157 mm
Speed at Rated Power 1,850 rpm
Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Standard Capability 50 °C
Note (2) Optimized VHP Plus is standard for the 14M3.
Torque Rise 41%
Maximum Altitude - Full Power 4237 m
Maximum Torque - VHP Plus 1542 N·m
Emissions Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Altitude - Full Power (Tier 3) 4374 m
Maximum Altitude - Full Power (Tier 2) 3672 m
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Standard - Fan Speed - Minimum 550 rpm
Note (4) Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Displacement 12.5 l
Number of Cylinders 6
Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Standard - Fan Speed - Maximum 1,600 rpm
Frame
Circle - Outer Diameter 1822 mm
Front Axle - Wheel Lean - Left/Right 17.1°
Front Axle - Total Oscillation per Side 32°
Service Refill Capacities
Transmission and Differential 89 l
Diesel Exhaust Fluid Tank (Tier 4 Only) 22 l
Hydraulic System 125 l
Circle Drive 7 l
Cooling System 60 l
Fuel Tank 416 l
Moldboard
Blade Width 4.2 m
Arc Radius 413 mm
Throat Clearance 117 mm
Blade Width - With End Bits 4290 mm
Blade Height - With Cutting Edge 631 mm
Blade Width - Without End Bits 4166 mm
Blade Height - Without Cutting Edge 585 mm
Blade Range
Maximum Depth of Cut 593 mm
Circle Centershift - Left 650 mm
Maximum Lift Above Ground 419 mm
Circle Centershift - Right 520 mm
Blade Tip Range - Backward 5°
Maximum Shoulder Reach Outside of Tires - Right 2004 mm
Moldboard Sideshift - Right 790 mm
Moldboard Sideshift - Left 740 mm
Maximum Shoulder Reach Outside of Tires - Left 1870 mm
Blade Tip Range - Forward 40°
Weights
Operating Weight - Typically Equipped 25968 kg
Gross Vehicle Weight - Base* - Total 23124 kg
Gross Vehicle Weight - Base* - Front Axle 6344 kg
Gross Vehicle Weight - Typically Equipped - Total 25968 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle 19053 kg
Gross Vehicle Weight - Typically Equipped - Front Axle 6915 kg
Gross Vehicle Weight - Base* - Rear Axle 16780 kg
Note *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).

SELECT MODELS TO COMPARE

Motor Graders

140

Base Power (1st Gear) - Net 136 kW
Engine Model Cat C7
Bore 110 mm
Stroke 127 mm
Compare models
Motor Graders

16 GC

Engine Model Cat® C13
Emissions Equivalent to U.S. EPA Tier 3/EU Stage IIIA
Displacement 12.5 l
Bore 130 mm
Compare models
Motor Graders

12K

Base Power (1st Gear) - Net 108 kW
Engine Model Cat C7
Displacement 7.2 l
Bore 105 mm
Compare models
Motor Graders

160 / 160 AWD

Base Power (1st Gear) - Net 159 kW
Engine Model Cat® C9
Base Power (1st Gear, AWD Off) - Net 159 kW
Base Power (1st Gear) - Net - Metric 159 kW
Compare models
Motor Graders

18

Base Power (1st Gear) - Net 227 kW
Engine Model Cat® C13
Bore 130 mm
Stroke 157 mm
Compare models
Motor Graders

14

Base Power (1st Gear) - Net 178 kW
Engine Model TCD3.6 L4
Bore 98 mm
Stroke 157 mm
Compare models
Motor Graders

18

Base Power (1st Gear) - Net 227 kW
Engine Model Cat® C13
Bore 130 mm
Stroke 157 mm
Compare models
Motor Graders

160K

Base Power (1st Gear) - Net 139 kW
Engine Model Cat® C7
Displacement 7.2 l
Bore 105 mm
Compare models
of
01
SEND REQUEST

Select your equipment and fill out your contact information

02
GET A QUOTE

A sales rep will send you an official quote and other related information

03
PAYMENT & DELIVERY

Payment – Lead time - Delivery

Select Up to
3 Models to Compare
Model 1
Model 2
Model 3
Compare Cancel